The Sintered Wire Mesh Filter---Type A Sintered Wire Mesh

The Type A sintered wire mesh is made from the 5-layer wire mesh. The wire meshes after sintered in the vaccum enviroment will bond tidely. And thus it can form the complete soliod structure. It can be used in many areas.

The material of the Type A Sintered Wire Mesh:

Standard material:SS304, SS304L, SS316, SS316L

Special Alloy Steel :Hastelloy C-276, Monel 400, Inconel600, SS904, SS904L, Duplex steel 2205

The size of the Type A Sintered Wire Mesh:

500×1000mm, 600×1200mm, 1000×1000mm, 1200×1200mm, 1200×1500mm

We can produce the wire mesh based on your needs.

The sinetered wire mesh has many advantages. It has the wide rangeg of filter rating depends on the wire mesh hole size. The filteration can varies from 1micron to 100micron. The filter rating can stay in the steady level. And its high mechnical stength worth a mention. The sintered filter has the two protective layer, the mesh of the filter layer can resist the high pressure . It is easy to clean. It can be reverse wash, by virture of adopting the surface layer filteration material. It can be used in the hightemperature enviroment around 480° C. The corrsion resistance assure it canbe used in the strong acid and alkali enviroment. It is the cost-effective product for it can be tractability. It suits for many kinds of machining, such as cutting, bending, punching, stretching, welding and so on.

If you are interested in this product, please contact us immediately.