The Type A sintered wire mesh is made from the 5-layer wire mesh. The wire meshes after sintered in the vaccum enviroment will bond tidely. And thus it can form the complete soliod structure. It can be used in many areas.
Stainless steel sintered mesh filter element is a widely used filter element type, usually made of stainless steel wire superimposed and sintered in vacuum. The stainless steel sintered mesh filter element has good corrosion resistance, strong permeability and high strength, high filtration accuracy, and the wire mesh is not easy to fall off. In the stainless steel sintered mesh filter element, if there is a blockage phenomenon, we can use the following methods to clean it:
The main filter material of the five-layer stainless steel sintered wire mesh filter element is a standard five-layer stainless steel sintered mesh. Standard five-layer stainless steel sintering is made by superimposing five layers of stainless steel wire mesh and vacuum sintering. The filter element made of it has the characteristics of strong corrosion resistance, good permeability, high strength, easy cleaning and reverse cleaning, high filtration accuracy, hygienic and clean filter material, and no wire mesh falling off.
As a new type of filter equipment, sintered wire mesh is sintered from multi-component metal woven wire mesh, so it has rigidity and high mechanical properties. What is the weaving technique of sintered mesh?There are preparation methods of sintered wire mesh： ①Plain Drid Structure: The stainle