Sinter Filter's Agitated Nutsche Filters and Filter Dryers are designed and manufactured with state-of-the-art technology from Mavag AG, Switzerland. These filters operate under pressure and/or vacuum, significantly reducing production time, improving product quality and minimizing environmental exposure.
Our innovative technology allows for filtering and washing of solids as well as drying in a single unit, resulting in a higher yield with no operator contact. Moreover, performing all operations in an enclosed system assures consistent product quality, simple validation as well as the required operational safety.
Our Filter/Filter-Dryers can be optimized to allow for frequent changes in product campaigns. It can also be offered in High Pharma or Sterile configurations as per FDA/MCA requirements.
Sinter filter/Filter-Dryers are offered in Stainless steel, Hastelloy and special alloys offer in various sizes ranging from 0.1M2 to 12M2
Sinter Filter's 5-layer sinter wire mesh and 6-layer sinter wire mesh are widly uesd in the Nuthsche Filter.The thickness for the sinter wire mesh is 1.7mm for 5-layer and 3.5mm for 6-layer.
Below is the technical data for our 5-layer sinter wire mesh.
Type A Sintered Wire Mesh Technical Data
|Model||Nominal Filter Rating (u)||Structure||Air permeability (L/min/cm²)||Bubble Pressure (mmH2O)|
|Thickness: 1.7(mm); Porosity : 37%；Weight kg/m²: 5-layer sintered wire mesh (8.4) 6-layer sintered wire mesh (14.4)|
Note: The 6-layer sintered wire mesh is to add one layer of 12 mesh to the 5-layer sintered wire mesh. Its thickness is 3.5mm. And it has the higher anti-pressure ability