With the questionaire in hand, we can begin to determine a solution. The following passage helps to illustrate the application of these varied solutions. This passage is intended as a guide only and is not absolute. Experience plays a big part in selecting a proper filtration system. It is important when the situation is complicated to consult an experienced filtration expert. The recommendations should be both effective for the desired filtration and cost effective. Ultimately, secondary filtration is an investment and must provide sufficient return on the investment.
Media Based Filtration - This is the mostcommon application used for secondary filtration. Utilizes either full flow or depth filtration to purify the oil. They are very simple to operate and maintain. The media based filtration can be divided into two types, the depth media and the full flow media.
In the last article, we have discussed why the oil industry need the filtration process. There are two types of the depth filtration ,the direct flow filtration filter and the axial flow filter. In the later passage, we are gonna introduce the axial flow depth filter. The axial flow depth filter use
Basically, the sintered wire mesh is a porous panel, which consist of multiple layers of metal meshes. The combination of the sintered wire mesh are quite different, there maybe will be the perforated metal mesh or the woven wire mesh.
Hebei Sinter Filter Technic Co.,Ltd is the professional manufacturer which specializes in producing the stainless steel sinterer wire mesh and other filter elements. We have 4 different types of sintered wire mesh filter, each of them has the different combination of different weave type of wire meshes. And we offer the sintered filter and the filter disc.
Sintered wire mesh are consist of more than one layer woven wire mesh. The layers of woven wire mesh will be sintered in the vacuum space. The single layer of the wire mesh will be rolled flattened uniformly, in the meanwhile the experienced will ensure the different layer are contact firmly at the cross over points.
With the special design and the long time improvement, the filter has the stable porous matrix, the precise bubble point, the close thickness tolerances and the uniformity of permeability. All these features makes the filter has the stable filtration performance, effective backwash cleaning and the long life span.
The filter media is a sintered wire mesh that contains 2 or 3 layers of the plain dutch woven wire mesh. The wire meshes were sintered, pressurized and calendered in the vacuum environment. The filter was manufactured based on the wire mesh, thus the filter has the average hole size and the steady a
Sintered wire mesh are consist of multiple layers of wire meshes. The sintering process put the wire meshes under the high heat and pressure in the vacuum environment then it can be sintered solidly. This process can make the sintered wire mesh obtain the excellent mechanical properties. It is the perfect material for the purification and filtration.
The sintered wire mesh is the perfect material for the filter. Due to the sintering process, the five layers can be bond tidely. The solid structure can resist the high speed shock. The opening hole will not deform easily, and the opening ratio can retain the good permeability.