Sintering the wire mesh is a process that improves the characteristics of metal woven wire mesh by connecting the contact points of all the wires together to constitute a mesh whose wires are securely melting in place. It can be achieved through a combination of heat and pressure, and the result is a single layer sintered mesh.
After being vacuum sintered, pressurized and calendered, the Type D sintered wire mesh is overlapped and stacked up by 2 or 3 layers of plain dutch woven wire meshes with equivalent hole sizes. We have capacity to produce the standard materials such as SS304, SS316, SS304L, SS316L and so on. So does sizes such as 500×1000mm, 600×1200mm, 1000×1000mm, 200mm×1200mm, 1200mm×1500mm and so on. At the meanwhile, the special alloy steel Hastelloy C-276, Monel 400, Inconel, Duplex steel 2205 are available based on customer's requirements.
The adoption of the tensile testing machine is utilized to test the tensile strength and elongation of the sintered wire mesh. The type D sintered wire meshes can be widely used in the powder transport, laboratory fluidbeds, driers and coolers. Widely adopted in chemical, pharmaceutical and beverage industries, the materials are qualified to bring better diversion. It can be produced into dynamic filter elements with effective filtration and separation and also helps a lot in industry production.
Our company specializes in manufacturing sintered wire meshes for several years. Type D sintered mesh just belongs to one of our products. Under the guidelines of the customer supreme and reputation oriented, we guarantee to provide you with the top-ranking sintered meshes.