Stainless Steel Sintered Wre Mesh Filter

The main filter material of the five-layer stainless steel sintered wire mesh filter element is a standard five-layer stainless steel sintered mesh. Standard five-layer stainless steel sintering is made by superimposing five layers of stainless steel wire mesh and vacuum sintering. The filter element made of it has the characteristics of strong corrosion resistance, good permeability, high strength, easy cleaning and reverse cleaning, high filtration accuracy, hygienic and clean filter material, and no wire mesh falling off.

Problems that are prone to occur in stainless steel sintered wire mesh filter elements:

1. The selection of stainless steel sintered mesh filter element is inappropriate. When the filter element is selected, it is not suitable for the current working environment. The filter element precision is too high, or the pressure exceeds its allowable working pressure. It will also cause the filter element to be flattened.

2. The stainless steel sintered mesh filter element is improperly installed, the installation of the filter element should be accurate and stable, and the filtration work has already started before the filter element is fixed, so that the filter element is damaged.

3. The stainless steel sintered mesh filter element is blocked and has not been replaced in time. The filter element is seriously blocked by pollutants during work and has not been cleaned in time, resulting in an increase in the pressure difference of the filter element, and insufficient strength of the filter element, which causes the filter element to be flattened.