Sintered wire mesh is made from multiple layers of woven wire mesh panels together through a sintering process. This process combines heat and pressure, permanently bonding multi-layers of meshes all together. The same physical process utilized to fuse individual wires together within a layer of wire meshes.

HHebei Sintering Filter Technology Co., Ltd. is a professional manufacturer specializing in the production of stainless steel sintered mesh and various filter elements. It is famous for its rich stainless steel wire and stainless steel wire mesh. We can provide you with 4 types of stainless steel sintered wire mesh.

The sintered wire mesh is made into a multilayer woven wire mesh panel using a sintering process. This process combines heat and pressure to permanently bond the multilayer webs together. The same physical process of fusing individual wires together within a mesh layer can also be used to fuse adjacent mesh layers together. This creates a unique material with excellent mechanical properties. It is the ideal material for purification and filtration. It can be 5, 6 or 7 layers of sintered wire mesh.

Hebei Sinter Filter Technic Co.,Ltd is the main supplier of the sintered wire mesh. It has introduced advanced vacuum sintering equipment and technology to manufacture multilayer sintered meshes with various structures and specifications, and use the sintered mesh to produce various filter elements.

5 Ply Sintered Stainless is our standard sintered mesh structure. A single layer of fine woven wire mesh was placed between two thicker square woven meshes, which were then added to two layers of sturdy Dutch woven wire mesh and sintered together to form a solid panel. A layer of fine woven wire mesh is used as a filter layer which can then be cut and made into various discs, tubes, boxes, and plates.

2 Layer Sintered Stainless Mesh is a new type of filter material with high mechanical strength and overall stiffness structure. 2 Layer Sintered Stainless Mesh is made by special techniques such as lamination and vacuum sintering on multi-layer wire mesh. The staggered mesh forms a uniform and ideal filtering structure, which not only overcomes the shortcomings of low strength, poor rigidity and unstable mesh shape of ordinary metal mesh, but also achieves reasonable matching and design of aperture, permeability and strength.

Hebei sinter Filter Technic Co., Ltd develops and supplies sintered wire mesh used for fine, deep or sub-micron filtration. Sintered mesh commonly applied materials are stainless steel types 304L and 316L. Exotic alloys are delivered on request. mold woven wire mesh and non woven sintered web is

Loss and distortion of the edge lead to inconsistent aperture sizes of the single layer laminate.
The sintering method, combination of warmtht and pressure, creates molecular diffusion-welds at each and every "intersection" in the sintered wire mesh where the wires cross over and under one-another, so as to make the sintered wire mesh full of enhanced mechanical and filtration properties.

Sintered mesh laminate is classified to porous material with high strength. Sintered filter mesh is made of stainless steel or other alloys. Single layer or multiple layers of woven sintered wire meshes are permanently bonded together by an unique diffusion-bonded technique. Compared with ancient wire mesh, Sintered filter mesh provides a lot of further edges like stability and mechanical strength. Therefore, sintered wire mesh is widely constructed as a filter medium in many industries.

The multi-layer metal sintered mesh filter is a new type of filter material with high mechanical strength and overall rigidity by vacuum lamination using a multi-layer stainless steel wire mesh. The mesh of the layers of the screen for producing the sintered mesh filter is interlaced to form a unifo