SLS (Single Layer Laminate) Series

According to the quantity of layers, sintered wire mesh can be divided into two series: single layer laminate and multiple layer sintered mesh laminate, such as five layer sintered wire mesh.

Loss and distortion of the edge lead to inconsistent aperture sizes of the single layer laminate.

The sintering method, combination of warmtht and pressure, creates molecular diffusion-welds at each and every "intersection" in the sintered wire mesh where the wires cross over and under one-another, so as to make the sintered wire mesh full of enhanced mechanical and filtration properties.

Take ten × ten plain weave plain-woven wire mesh for associate example, the cross-sectional drawing shows clear amendment before sintering and when sintering of the plain-woven wire mesh.

Five Layer Sintered Wire Mesh

From two layers to five layers, multiple layer sintered mesh laminate provides reinforced mechanical features for filters and extreme environment applications. Single layer laminate wire mesh for filtration, separation, sifting, Single layer laminate lacks structural rigidity which easily leads to damage. Adding to a different or a lot of layers in sequence, through sintering method, a deep filter medium is capable of withstanding air mass drop.

With a five-layer sintered wire mesh as a strong base, six-layer sintered mesh is made to add one layer of 12 mesh. Six-layer sintered mesh laminate can be used as filtering, washing, drying that three in one medical filter plate, which can be divided into two types: split and monolithic construction filter plate.