  +86-318-7580001                  sales@sinter-filter.com

Sinter Exhibition

5 Ply Sintered Stainless

Views: 10     Author: Site Editor     Publish Time: 2019-11-20      Origin: Site


  5 Ply Sintered Stainless is our standard sintered mesh structure. A single layer of fine woven wire mesh was placed between two thicker square woven meshes, which were then added to two layers of sturdy Dutch woven wire mesh and sintered together to form a solid panel. A layer of fine woven wire mesh is used as a filter layer which can then be cut and made into various discs, tubes, boxes, and plates.

 Material of 5 ply sintered stainless:

  AISI304; AISI304L; AISI316; AISI316L

  Special alloy steel Hastelloy, Monel, Inconel and Titanium alloys are available upon request.


Sizes of 5 ply sintered stainless:

  500x1000mm, 600x1200mm and 1000x1000mm, 1200x1200mm, and other sizes.


 Average aperture of 5 ply sintered stainless:

   The average pore size determined by the bubble principle, in μm.


 Relative permeability coefficient

   The unit pressure difference, fluid flow per unit area through the filter element, the unit is L / min.cm2.Pa

Article inquire

Contact Us

ADD: No.30, Weiyi Road, Economic Development Zone,Anping County053600,Hebei Province,China 
TEL: +86-318-7580001
FAX:  +86-318-7580011
E-mail: sales@sinter-filter.com
Website: http://www.sinter-filter.com
All Content © 2016 Hebei Sinter Filter Technic Co., Ltd.  Design by rongchuangmedia