Sintered Mesh Filter Disc is a new filter disc product. It is the combination of multi-layer filter disc. it has five layers and the structure includes protecting layer, filtration control layer, scattered skeleton layer, skeleton supporting layer.
Standard 5 layers sintered mesh filter discs
The sintered wire mesh is made into a multilayer woven wire mesh panel using a sintering process. This process combines heat and pressure to permanently bond the multilayer webs together. The same physical process of fusing individual wires together within a mesh layer can also be used to fuse adjacent mesh layers together. This creates a unique material with excellent mechanical properties. It is the ideal material for purification and filtration. It can be 5, 6 or 7 layers of sintered wire mesh.
Hebei Sinter Filter Technic Co.,Ltd is the main supplier of the sintered wire mesh. It has introduced advanced vacuum sintering equipment and technology to manufacture multilayer sintered meshes with various structures and specifications, and use the sintered mesh to produce various filter elements.
5 Ply Sintered Stainless is our standard sintered mesh structure. A single layer of fine woven wire mesh was placed between two thicker square woven meshes, which were then added to two layers of sturdy Dutch woven wire mesh and sintered together to form a solid panel. A layer of fine woven wire mesh is used as a filter layer which can then be cut and made into various discs, tubes, boxes, and plates.
2 Layer Sintered Stainless Mesh is a new type of filter material with high mechanical strength and overall stiffness structure. 2 Layer Sintered Stainless Mesh is made by special techniques such as lamination and vacuum sintering on multi-layer wire mesh. The staggered mesh forms a uniform and ideal filtering structure, which not only overcomes the shortcomings of low strength, poor rigidity and unstable mesh shape of ordinary metal mesh, but also achieves reasonable matching and design of aperture, permeability and strength.
The SS sintered laminate panel is the ideal filter element of pharmaceutical machines for three-in-one filtration (filtering, washing and drying). SS sintered laminate panel possesses high mechanical strength, long life-span, precise filtration rating of 1 to 200μm, and the ability to be cleaned repeatedly. Sintered laminate plate can be classified into the monoblock type and the combined type according to different structures, and its maximum diameter can reach up to 3000mm.
This SS sintered wire cloth is made by sintering the perforated metal with multiple layers of stainless steel sintered wire cloth. Accoring to the perforated plate support, our products could show high compressive and mechanical strength when put next with similar items, and sintered wire mesh is used to make filters with many types of shapes just like disc, tube and sheet. Based on these, ss sintered wire cloth is applicable in many fields, such as pharmaceutical, food and beverage, water treatment, thin film, power station, etc.