Sintered Metal Mesh is a wire filtering cloth made by pressing multi-layer stainless steel woven wire cloth, then sintered together in a vacuum furnace. This kind of filtering cloth is much better than common metal woven wire mesh with good strength, hardness and good positioning of opening.

Increasingly, multiple layered mesh laminates are now being specified to meet the challenges of today’s demanding filtration applications. These advanced solutions enable a range of advantages which often more than justify the slightly higher initial cost price, alongside improvements in efficiency

Sintered meshes are mostly laminated by multiple layers of stainless steel wire mesh by the process of “sintering”. The sintered metal layer has the support layer and filter layer.

Sintered wire mesh metal filter cloth is a porous metal plate made from multilayer stainless steel wire mesh, and sintered into one metal panel. It is usually consists of 5 layer (or 6-8 layer) mesh: protect mesh layer, filter mesh layer, protection mesh layer, reinforcement mesh layer.

HHebei Sintering Filter Technology Co., Ltd. is a professional manufacturer specializing in the production of stainless steel sintered mesh and various filter elements. It is famous for its rich stainless steel wire and stainless steel wire mesh. We can provide you with 4 types of stainless steel sintered wire mesh.

The sintered wire mesh is made into a multilayer woven wire mesh panel using a sintering process. This process combines heat and pressure to permanently bond the multilayer webs together. The same physical process of fusing individual wires together within a mesh layer can also be used to fuse adjacent mesh layers together. This creates a unique material with excellent mechanical properties. It is the ideal material for purification and filtration. It can be 5, 6 or 7 layers of sintered wire mesh.

Hebei Sinter Filter Technic Co.,Ltd is the main supplier of the sintered wire mesh. It has introduced advanced vacuum sintering equipment and technology to manufacture multilayer sintered meshes with various structures and specifications, and use the sintered mesh to produce various filter elements.

5 Ply Sintered Stainless is our standard sintered mesh structure. A single layer of fine woven wire mesh was placed between two thicker square woven meshes, which were then added to two layers of sturdy Dutch woven wire mesh and sintered together to form a solid panel. A layer of fine woven wire mesh is used as a filter layer which can then be cut and made into various discs, tubes, boxes, and plates.

2 Layer Sintered Stainless Mesh is a new type of filter material with high mechanical strength and overall stiffness structure. 2 Layer Sintered Stainless Mesh is made by special techniques such as lamination and vacuum sintering on multi-layer wire mesh. The staggered mesh forms a uniform and ideal filtering structure, which not only overcomes the shortcomings of low strength, poor rigidity and unstable mesh shape of ordinary metal mesh, but also achieves reasonable matching and design of aperture, permeability and strength.

The sintered wire mesh filter is the ideal media for filtration, separation and purification. Using the compressing and sintering technology, it is combine with many layers of stainless steel woven wire mesh with different specification.