Sintered metal filter element: Sintered filter is a new type of filter material with high strength and overall rigidity, which is made of multi-layer sintered metal filters, which is pressed by special laminate and pressed by vacuum.

Sintered filter description: PP microporous folding sinter filter is made of olefin fiber membrane and non-woven fabric or (net) inner and outer support layer. The filter shell, center rod and end cap are processed by hot melt welding technology, without any glue, no leakage.

Sinter filter introduction: PA sintered filter (ie PA filter, PAC filter, PA decarbonization filter) uses ultra-high polyethylene and carbon fiber as the main raw materials, the material meets GMP, FDA requirements. Each sinter filter is tested for bubble uniformity before leaving the factory to ensure uniform micropore distribution.

Loss and distortion of the edge lead to inconsistent aperture sizes of the single layer laminate. The sintering method, combination of warmtht and pressure, creates molecular diffusion-welds at each and every "intersection" in the sintered wire mesh where the wires cross over and under one-another, so as to make the sintered wire mesh full of enhanced mechanical and filtration properties.

Sintered mesh laminate is classified to porous material with high strength. Sintered filter mesh is made of stainless steel or other alloys. Single layer or multiple layers of woven sintered wire meshes are permanently bonded together by an unique diffusion-bonded technique. Compared with ancient wire mesh, Sintered filter mesh provides a lot of further edges like stability and mechanical strength. Therefore, sintered wire mesh is widely constructed as a filter medium in many industries.

The multi-layer metal sintered mesh filter is a new type of filter material with high mechanical strength and overall rigidity by vacuum lamination using a multi-layer stainless steel wire mesh. The mesh of the layers of the screen for producing the sintered mesh filter is interlaced to form a unifo

Sintered metal mesh characteristics1. Sintered mesh with high strength and sensible rigidity: it's high mechanical strength and compressive strength, and has sensible process, attachment and assembly performance, and is simple to use.

Brief Introduction of Sintered mesh The multi-layer sintered metal mesh is a new type of filter material which is made of a multi-layer metal woven wire mesh and sintered mesh filter is manufactured by a special lamination pressing and vacuum sintering method, and has high mechanical strength and overall rigid structure.

The wedge-shaped wire filter cylinder produced by the company is welded by winding wraps. Wedge wire filter has high welding strength, uniform gap, high precision, corrosion resistance, long service life, smooth inner surface of the filter cartridge and perfect roundness. The wire filter cartridges produced by our company are widely used in various types of large and medium-sized filtration equipment, such as automatic cleaning filters, scraper filters, automatic sewage filters, rotary fine grid filters, drum fine grids, rotary screens, etc. Solid-liquid separation equipment.

1. Application range of mesh filters in petrochemical industry Sintered wire mesh filter main application areas: oil, gasoline, aerospace kerosene and other oil filtration; separation of extracted polymer; cooling water, industrial circulating water, oil well water injection filtration; recovery of filtration catalyst.