Sintered wire mesh is made from mutiple layers of woven wire mesh panel togher using a sintering process. This process combines heat and pressure to permanently bond multi-layers of mesh together. The same physical process used to fuse individual wires togher within a layer of wire mesh.The follow p
Established in 2006, Hebei Sinter Filter Technic Co.,LTD is a professional manufacturer which specializes in producing multi-layer sintered wire mesh and filter element. According to the customer’s different needs, we customize different materials and different sizes of products. and we offer a reas
Mott offers a wide range of cleanable all-metal filters for optimum filtration in critical applications. Our filter cartridges are used in liquid and gas applications under the most extreme temperature, pressure and corrosion conditions.Want to find out more or want to receive a quote? Fill out the
The PTFE filter element is produced by sintering pure PTFE pellets without the use of other materials in the structure. These filter elements are typically supplied when only 100% pure PTFE is used. If appropriate, it is generally preferred to provide a K-type disposable filter element because both
1. Application range of mesh filters in petrochemical industrySintered wire mesh filter main application areas: oil, gasoline, aerospace kerosene and other oil filtration; separation of extracted polymer; cooling water, industrial circulating water, oil well water injection filtration; recovery of f
Our 5-layer laminate is a standard and widely used type of sintered wire mesh . A single layer of fine woven wire mesh is placed between two layers of coarser square woven meshes, which is then added to two layers of a strongDutch woven wire mesh and sintered together to form a strong plate. The sin
Stainless steel pleated filter is generally made of 304, 304L, 316, 316L stainless steel woven mesh or stainless steel fiber sintered felt as the main filter material. The sealing surfaces of sintered stainless steel filter are welded by argon arc welding process.
Stainless steel pleated filter core adopts polypropylene microporous fiber membrane as filter medium, with high retention efficiency, large flux and large amount of dirt. Other structural materials are polypropylene, with wide chemical compatibility, very low dissolution, use long life.
Sintered filter description: PP microporous folding sinter filter is made of olefin fiber membrane and non-woven fabric or (net) inner and outer support layer. The filter shell, center rod and end cap are processed by hot melt welding technology, without any glue, no leakage.