Hebei sinter Filter Technic Co., Ltd develops and supplies sintered wire mesh used for fine, deep or sub-micron filtration. Sintered mesh commonly applied materials are stainless steel types 304L and 316L. Exotic alloys are delivered on request. mold woven wire mesh and non woven sintered web is
Sintered mesh laminate is classified to porous material with high strength. Sintered filter mesh is made of stainless steel or other alloys. Single layer or multiple layers of woven sintered wire meshes are permanently bonded together by an unique diffusion-bonded technique. Compared with ancient wire mesh, Sintered filter mesh provides a lot of further edges like stability and mechanical strength. Therefore, sintered wire mesh is widely constructed as a filter medium in many industries.
The multi-layer metal sintered mesh filter is a new type of filter material with high mechanical strength and overall rigidity by vacuum lamination using a multi-layer stainless steel wire mesh. The mesh of the layers of the screen for producing the sintered mesh filter is interlaced to form a unifo
Brief Introduction of Sintered mesh
The multi-layer sintered metal mesh is a new type of filter material which is made of a multi-layer metal woven wire mesh and sintered mesh filter is manufactured by a special lamination pressing and vacuum sintering method, and has high mechanical strength and overall rigid structure.
The stainless steel sintered wire mesh is made of three or more layers (three or more layers) of metal sintered mesh, which is manufactured by special lamination pressing and vacuum sintering. It has a new type of filtration with high mechanical strength and overall rigidity. material.
The sintered mesh filter can effectively solve the problems of large flow resistance, easy deformation, low strength, short service life and low product quality of the existing filter. The stainless steel sintered mesh filter consists of a stainless steel mesh and a peripheral edge.
The stainless steel sintered mesh filter is divided into five layers, a protective layer, a filter layer, a separation layer, a reinforcement layer and a support layer. Below the protective layer is a filter layer. There is a split layer between the filter layer and the support layer for Sintered me