The sintered wire mesh is the perfect material for the filter. Due to the sintering process, the five layers can be bond tidely. The solid structure can resist the high speed shock. The opening hole will not deform easily, and the opening ratio can retain the good permeability.

The Type A sintered wire mesh is made from the 5-layer wire mesh. The wire meshes after sintered in the vaccum enviroment will bond tidely. And thus it can form the complete soliod structure. It can be used in many areas.

The sintered wire mesh is the combination of multiple layers of woven wire mesh that sintered together to form a corresponding structure. The sintering process combines heat and pressure, in this process the meshes sintered tidely. After compressing and calendering, the wire meshes becomes the standard sintered wire mesh. In thish way, the sintered wire mesh can offer the excellen t mechanical properties. It is ideal material for purification and filtration.

The Sintered wire mesh has been widely used in the filteration process, especially in the oil and gas filteration. The sintered wire mesh has the extremely strong stability. The sinter process ensures the differernt layers of the wire mesh are strongly bonded with each layers. In this way, the filter are more suitable for the materials that require high percentage of open areas or that require a precise pore size.And it’s marvelous strength can resist the high-pressure backwashing, the punctures and abrasuons.

Different liquids have different saturated vapor pressures. At a temperature of 70°C, water starts to boil at a pressure of about 30kPa, while oil can only boil at a low pressure of 5Pa. At the same temperature, the saturated vapor pressure of oil is much lower than that of water. Therefore, when the pressure of the oil liquid surface is reduced below the saturated vapor pressure of water by vacuuming, the water in the oil liquid will violently vaporize and overflow from the oil in the form of steam. Through the suction of the vacuum, the oil enters the vacuum tank from the top and sprays down through the nozzle.

If you need purchase the top-quality wire mesh products? Look no further than Sintered Wire Mesh. The Sintered wire mesh has five layers. These five layers were sintered together. Thus, it is more stong, solid and structure stable than the tradtioal wire mesh. This high quality product can be applied in many ways.The wire mesh are made of stainless steel. The product is a strong, durable, and heat-resistant material that can be used in a variety of industrial applications.

Basically the sintered wire mesh have 5 layers of wire mesh.Through the process, like rolling, pressurizing, and vacuum sintering, the wire meshes are formed into a whole product.

The tempered steel soften channel component is made out of a defensive layer, an accuracy control layer, a free layer and a multi-layer strengthening layer. After the five-layer work is sintered, it has amazingly high mechanical quality and compressive quality.

Highlight Demonstrated heartiness for cleaning and rehash use Long channel life Work in high temperature conditions High carbon obstruction High filtration zone for creased flame rendition.