Stainless steel sintered mesh filter element is a widely used filter element type, usually made of stainless steel wire superimposed and sintered in vacuum. The stainless steel sintered mesh filter element has good corrosion resistance, strong permeability and high strength, high filtration accuracy, and the wire mesh is not easy to fall off. In the stainless steel sintered mesh filter element, if there is a blockage phenomenon, we can use the following methods to clean it:

If you need purchase the top-quality wire mesh products? Look no further than Sintered Wire Mesh. The Sintered wire mesh has five layers. These five layers were sintered together. Thus, it is more stong, solid and structure stable than the tradtioal wire mesh. This high quality product can be applied in many ways.The wire mesh are made of stainless steel. The product is a strong, durable, and heat-resistant material that can be used in a variety of industrial applications.

The Sinter filter for sea water machine is designed for purifying the sea water.Do you know that the seemingly clear water may contain thousands of germs? So if you want to use the sea water, you’d better use a sea water purifier.Our filter machine uses the Duplex steel 2205 and SS904L, these steel

Basically the sintered wire mesh have 5 layers of wire mesh.Through the process, like rolling, pressurizing, and vacuum sintering, the wire meshes are formed into a whole product.

The main filter material of the five-layer stainless steel sintered wire mesh filter element is a standard five-layer stainless steel sintered mesh. Standard five-layer stainless steel sintering is made by superimposing five layers of stainless steel wire mesh and vacuum sintering. The filter element made of it has the characteristics of strong corrosion resistance, good permeability, high strength, easy cleaning and reverse cleaning, high filtration accuracy, hygienic and clean filter material, and no wire mesh falling off.

Sintered metal mesh is one of the most widely used filter materials. It has 3 to 8 layers in total. Usually 5 layers. The material of the sintered metal mesh filter can be stainless steel wire, Monel wire, Inconel wire, etc.

The sintered wire meshes are manufactured of layers of metal wire mesh. The woven wire netting is very strong and durable after sintering. The more layers, the stronger the durability of the sintered wire mesh.

Sintered wire meshes are commonly applicated in fluidized bed applications and can be used for conveying powders and other dry solid materials.

Multi-layer sintered wire mesh is superior to ordinary metal mesh with higher durability, strength, hardness and good pore location. The sintered wire mesh provides high flow rates and average loads with adequate cleaning and backwash performance.

文章摘要