The Type D sintered wire mesh has 2 or 3 layers of the plain dutch woven wire mesh with the same hole size. The sintered wire mesh will be sintered in the vacuum space, and get pressurized and calendered. The hole size were averagely placed on the metal sheet. The Type D sintered wire mesh can be widely used in powder transport, laboratory fluid bed, driers and coolers.

The Sintered wire mesh has been widely used in the filteration process, especially in the oil and gas filteration. The sintered wire mesh has the extremely strong stability. The sinter process ensures the differernt layers of the wire mesh are strongly bonded with each layers. In this way, the filter are more suitable for the materials that require high percentage of open areas or that require a precise pore size.And it’s marvelous strength can resist the high-pressure backwashing, the punctures and abrasuons.

Hebei Sinter Filter Technic Co.,Ltd is a professional manufacturer which specializes in stainless steel sintered wire mesh and many other filter elements. Our principle is quality first. Customer’s demand is our persuit. Our professional team will inspect the whole manufacturering process. In this w

Different liquids have different saturated vapor pressures. At a temperature of 70°C, water starts to boil at a pressure of about 30kPa, while oil can only boil at a low pressure of 5Pa. At the same temperature, the saturated vapor pressure of oil is much lower than that of water. Therefore, when the pressure of the oil liquid surface is reduced below the saturated vapor pressure of water by vacuuming, the water in the oil liquid will violently vaporize and overflow from the oil in the form of steam. Through the suction of the vacuum, the oil enters the vacuum tank from the top and sprays down through the nozzle.

Stainless steel sintered mesh filter element is a widely used filter element type, usually made of stainless steel wire superimposed and sintered in vacuum. The stainless steel sintered mesh filter element has good corrosion resistance, strong permeability and high strength, high filtration accuracy, and the wire mesh is not easy to fall off. In the stainless steel sintered mesh filter element, if there is a blockage phenomenon, we can use the following methods to clean it:

If you need purchase the top-quality wire mesh products? Look no further than Sintered Wire Mesh. The Sintered wire mesh has five layers. These five layers were sintered together. Thus, it is more stong, solid and structure stable than the tradtioal wire mesh. This high quality product can be applied in many ways.The wire mesh are made of stainless steel. The product is a strong, durable, and heat-resistant material that can be used in a variety of industrial applications.

The Sinter filter for sea water machine is designed for purifying the sea water.Do you know that the seemingly clear water may contain thousands of germs? So if you want to use the sea water, you’d better use a sea water purifier.Our filter machine uses the Duplex steel 2205 and SS904L, these steel

Basically the sintered wire mesh have 5 layers of wire mesh.Through the process, like rolling, pressurizing, and vacuum sintering, the wire meshes are formed into a whole product.

The sintered mesh filter element for mineral processing has high mechanical strength and an overall rigid structure. It is an ideal filtering structure. You can choose the material of the sintered mesh filter element for mineral processing, which is usually made of stainless steel.The features of th