When you see this question, the answer is seemingly simple. Of course the filtration process is designed to remove the impurities and the particle from the oil. However, there are many different products exist in the marketplace and the name of these products may be varied in the different area. Thus it would confuse some of us or the oil process may be oversimplify in order to cut through the confusion.

Stainless steel sintered mesh filter element is a widely used filter element type, usually made of stainless steel wire superimposed and sintered in vacuum. The stainless steel sintered mesh filter element has good corrosion resistance, strong permeability and high strength, high filtration accuracy, and the wire mesh is not easy to fall off. In the stainless steel sintered mesh filter element, if there is a blockage phenomenon, we can use the following methods to clean it:

The stainless steel sintered wire mesh is a metal wire filter cloth which is made by compressing multiple layers of stainless steel braided wire and then sintering in a vacuum furnace.Stainless steel sintered wire mesh parametersFiltration fineness :2-60micron.Operating temperature :-20℃~ 600℃.Max.P

Type C Sintered Wire Mesh product is sintered by the punching plate and multi-layer stainless steel wire mesh. Due to the support of punching plate, it has the higher pressure and mechanical strength. Type C Sintered Wire Mesh it is mainly used in food&beverage, water treatment, dust removing, pharmacy, polymer,etc. Type C Sintered Wire Mesh can be processed into various filters: tube, disc and sheet. The thickness of the punching plate and structure of the wire mesh can be customized according to the user’s requirements.

Materials of Sintered foil mesh for the Orthodontics medical application

Standard materials of theType C Sintered Wire Mesh are SS304, SS304L, SS316, SS316L.According to customer requirements,alloy steels Hastelloy C-276, Monel 400, Inconel 600, SS904, SS904L, and dual phase steel 2205 are acceptable.

Relying on quality control measures and advanced technology, the sintered wire mesh produced by our company has been welcomed by customers from all over the world. Our products can be mainly divided into 4 types, namely type A to D Sintered Wire Mesh.

Three-layer sintered mesh introduction: The three-layer sintered mesh is a new type of filter material with high mechanical strength and overall rigidity by vacuum lamination using a three-layer stainless steel sintered wire mesh.

The stainless steel sintered mesh filter is divided into five layers, a protective layer, a filter layer, a separation layer, a reinforcement layer and a support layer. Below the protective layer is a filter layer. There is a split layer between the filter layer and the support layer for Sintered me

The stainless steel sintered mesh filter can effectively solve the problems of large flow resistance, easy deformation, low strength, short service life and low product quality of the existing filter. The stainless steel sintered mesh filter consists of a stainless steel sintered mesh and a surround