The sintered stainless steel filter element is made of stainless steel powder and is sintered by high temperature in a vacuum furnace after being pressed by a mold. With its unique technology, each step of the production process (including powder particle distribution, molding and sintering) is strictly controlled, generally tubular and flake.

Stainless steel pleated filter is generally made of 304, 304L, 316, 316L stainless steel woven mesh or stainless steel fiber sintered felt as the main filter material. The sealing surfaces of sintered stainless steel filter are welded by argon arc welding process.

Stainless steel pleated filter core adopts polypropylene microporous fiber membrane as filter medium, with high retention efficiency, large flux and large amount of dirt. Other structural materials are polypropylene, with wide chemical compatibility, very low dissolution, use long life.

Sintered metal filter element: Sintered filter is a new type of filter material with high strength and overall rigidity, which is made of multi-layer sintered metal filters, which is pressed by special laminate and pressed by vacuum.

Sintered filter description: PP microporous folding sinter filter is made of olefin fiber membrane and non-woven fabric or (net) inner and outer support layer. The filter shell, center rod and end cap are processed by hot melt welding technology, without any glue, no leakage.

Sinter filter introduction: PA sintered filter (ie PA filter, PAC filter, PA decarbonization filter) uses ultra-high polyethylene and carbon fiber as the main raw materials, the material meets GMP, FDA requirements. Each sinter filter is tested for bubble uniformity before leaving the factory to ensure uniform micropore distribution.

The SS sintered laminate panel is the ideal filter element of pharmaceutical machines for three-in-one filtration (filtering, washing and drying). SS sintered laminate panel possesses high mechanical strength, long life-span, precise filtration rating of 1 to 200μm, and the ability to be cleaned repeatedly. Sintered laminate plate can be classified into the monoblock type and the combined type according to different structures, and its maximum diameter can reach up to 3000mm.

This SS sintered wire cloth is made by sintering the perforated metal with multiple layers of stainless steel sintered wire cloth. Accoring to the perforated plate support, our products could show high compressive and mechanical strength when put next with similar items, and sintered wire mesh is used to make filters with many types of shapes just like disc, tube and sheet. Based on these, ss sintered wire cloth is applicable in many fields, such as pharmaceutical, food and beverage, water treatment, thin film, power station, etc.

SS sintered wire mesh is made of high quality stainless steel wire and formed under the specific temperature conditions and then through drawing machine stretched to the provision of the wire.

The sintered square woven mesh drawing is mainly used to process various kinds of gas and liquid. Sintered woven mesh is produced by sintering multiple layers of plain weave square woven mesh together, and sintered square woven mesh drawing has some excellent features due to the large open space share of sq.mesh, such as low resistance, high air permeability, large flow rate, etc. what’s more, every layer is optional, so our product could be customized.