The Type D Sintered Wire Mesh consist of 2-3 layers of plain dutch woven wire mesh. The distinguish feature of the plain dutch woven wire mesh is the equal hole size. In the vacuum space, the wire meshes will be sintered, pressurized and calendered.

The Type D sintered wire mesh has 2 or 3 layers of the plain dutch woven wire mesh with the same hole size. The sintered wire mesh will be sintered in the vacuum space, and get pressurized and calendered. The hole size were averagely placed on the metal sheet. The Type D sintered wire mesh can be widely used in powder transport, laboratory fluid bed, driers and coolers.

The sintered wire mesh is the combination of multiple layers of woven wire mesh that sintered together to form a corresponding structure. The sintering process combines heat and pressure, in this process the meshes sintered tidely. After compressing and calendering, the wire meshes becomes the standard sintered wire mesh. In thish way, the sintered wire mesh can offer the excellen t mechanical properties. It is ideal material for purification and filtration.

The principle channel media of cone shaped channel are treated steel woven work and multilayer sintered work. As indicated by the qualities and focal points of the circle channel, the cone shaped channel can expand the channel zone and release the material without any problem.

Immobilized enzyme reaction separator (solid-solid-liquid separator) It is a device which separates the product from the immobilized enzyme, the reactive liquid (water phase or non-aqueous phase) after the reaction with a mixture of the raw material and the intermediates in the immobilized enzyme semi-synthetic method (referred to as enzymic method).