The Sintered wire mesh has been widely used in the filteration process, especially in the oil and gas filteration. The sintered wire mesh has the extremely strong stability. The sinter process ensures the differernt layers of the wire mesh are strongly bonded with each layers. In this way, the filter are more suitable for the materials that require high percentage of open areas or that require a precise pore size.And it’s marvelous strength can resist the high-pressure backwashing, the punctures and abrasuons.

Different liquids have different saturated vapor pressures. At a temperature of 70°C, water starts to boil at a pressure of about 30kPa, while oil can only boil at a low pressure of 5Pa. At the same temperature, the saturated vapor pressure of oil is much lower than that of water. Therefore, when the pressure of the oil liquid surface is reduced below the saturated vapor pressure of water by vacuuming, the water in the oil liquid will violently vaporize and overflow from the oil in the form of steam. Through the suction of the vacuum, the oil enters the vacuum tank from the top and sprays down through the nozzle.

If you need purchase the top-quality wire mesh products? Look no further than Sintered Wire Mesh. The Sintered wire mesh has five layers. These five layers were sintered together. Thus, it is more stong, solid and structure stable than the tradtioal wire mesh. This high quality product can be applied in many ways.The wire mesh are made of stainless steel. The product is a strong, durable, and heat-resistant material that can be used in a variety of industrial applications.

The Sinter filter for sea water machine is designed for purifying the sea water.Do you know that the seemingly clear water may contain thousands of germs? So if you want to use the sea water, you’d better use a sea water purifier.Our filter machine uses the Duplex steel 2205 and SS904L, these steel

Basically the sintered wire mesh have 5 layers of wire mesh.Through the process, like rolling, pressurizing, and vacuum sintering, the wire meshes are formed into a whole product.

The self-cleaning filter for sea water filtration is sintered by the punching plate and multi-layer stainless steel wire mesh.Due to the support of punching plate, it has the higher pressure and mechanical strength. It is mainly used in food&beverage, water treatment, dust removing, pharmacy……

The tempered steel soften channel component is made out of a defensive layer, an accuracy control layer, a free layer and a multi-layer strengthening layer. After the five-layer work is sintered, it has amazingly high mechanical quality and compressive quality.

Highlight Demonstrated heartiness for cleaning and rehash use Long channel life Work in high temperature conditions High carbon obstruction High filtration zone for creased flame rendition.

As per the arrangement strategy for channel screen material , it tends to be isolated into hardened steel woven work , copper work, tangle type work , tempered steel sintered work , dark silk fabric , excited square work , metal plate work , steel plate work , punching network and other metal work ,

Channel circle, likewise named of wire work plates, is essentially made of tempered steel woven wire fabric, treated steel sintered work, stirred wire work and metal wire material, and so forth.