The sintered wire mesh filter elements adopt a large number of high-precision welding processes. The sintered filter elements are rounded and then welded. The roundness of the weld should be ensured. After the welding is flat, the weld can be corrected to make the overall look more beautiful.
The sintered wire mesh filter element is a relatively new type of filter, which is made by vacuum sintering, and is a filter material with high filtration accuracy and uniform filtration particles. The sintered wire mesh filter element can be repeatedly cleaned and reused, which is more practical than traditional filters.
Stainless steel sintered mesh filter element is a widely used filter element type. It is usually made of stainless steel wire for superposition and vacuum sintering. The stainless steel sintered mesh filter element has good corrosiveness, strong permeability and high strength, high filtration accuracy, and the wire mesh is not easy to fall off. In the stainless steel sintered mesh filter element, if there is a clogging phenomenon, we can use the following methods to clean it: