Stainless steel sintered mesh filter element is a widely used filter element type, usually made of stainless steel wire superimposed and sintered in vacuum. The stainless steel sintered mesh filter element has good corrosion resistance, strong permeability and high strength, high filtration accuracy, and the wire mesh is not easy to fall off. In the stainless steel sintered mesh filter element, if there is a blockage phenomenon, we can use the following methods to clean it:
Type C Sintered Wire Mesh product is sintered by the punching plate and multi-layer stainless steel wire mesh. Due to the support of punching plate, it has the higher pressure and mechanical strength. Type C Sintered Wire Mesh it is mainly used in food&beverage, water treatment, dust removing, pharmacy, polymer,etc. Type C Sintered Wire Mesh can be processed into various filters: tube, disc and sheet. The thickness of the punching plate and structure of the wire mesh can be customized according to the user’s requirements.
The SS sintered laminate panel is the ideal filter element of pharmaceutical machines for three-in-one filtration (filtering, washing and drying). SS sintered laminate panel possesses high mechanical strength, long life-span, precise filtration rating of 1 to 200μm, and the ability to be cleaned repeatedly. Sintered laminate plate can be classified into the monoblock type and the combined type according to different structures, and its maximum diameter can reach up to 3000mm.