Type A Sintered Wire Mesh
Summary
It is one standard combination 5-layer sintered wire mesh for the widest application. 5-layer different useless wire mesh made from stainless steel are brought together as per the different combination. They are sintered together through vacuum sinter、compression and rolling and made into a kind of porous material.
Characterictics:
·Large areas , From 1micron to 100micron it all has the well filtration performance .
·Steady filter rating, As to the two protective layers and sinter arts, the mesh of the filter layer is not easy to change.
·High mechanical strength. Excellent resistance to pressure ang high mechanical strength due to the fourth and fifth layers reinforced.
·Washability.Easy to wash, especially back washing owing to the surface.
·Heat resistance. Heat resistant up to 480℃.
·Corrosion resistance. Corrosion resistance as to a result of adopting SUS316L.
·Tractability.Suit to cut、punching、warp、tension and jointing.
Material: Standard material is SUS316L (AISI316L).
Size: Standard size are 500×1000mm、600×1200mm, other sizes in the above-mentioned range are also available according to customer's needs.
| |
Curve of Air Flow rate |
|
| |
|
|
|
 |
|
| |
FLOW RATE(L/min/c㎡) |
|
Norminal
Filter rating
(micron) |
Protective
Layer |
Control Layer |
Dispersion
Layer |
Reinforcing
Layer |
Reinforcing
Layer |
Thickness
mm |
A.P. at 1000Pa
(L/min/c㎡) |
Mean B.P.P
(mmH2O) |
Weight
Kg/㎡ |
Porosity
(%)
|
| 1
|
200
|
400×3000
|
200
|
12×64
|
64×12
|
1.7
|
1.81
|
360～600
|
Five-layer
Sintered wire mesh
(8.4)
Six-layer
Sintered wire mesh
(14.4)
|
About 40%
|
| 2
|
100
|
325×2300
|
100
|
12×64
|
64×12
|
1.7
|
2.35
|
300～590
|
| 5
|
100
|
200×1400
|
100
|
12×64
|
64×12
|
1.7
|
2.42
|
260～550
|
| 10
|
100
|
165×1400
|
100
|
12×64
|
64×12
|
1.7
|
3.00
|
220～500
|
| 15
|
100
|
165×1200
|
100
|
12×64
|
64×12
|
1.7
|
3.41
|
200～480
|
| 20
|
100
|
165×800
|
100
|
12×64
|
64×12
|
1.7
|
4.50
|
170～450
|
| 25
|
100
|
165×600
|
100
|
12×64
|
64×12
|
1.7
|
6.12
|
150～410
|
| 30
|
100
|
400
|
100
|
12×64
|
64×12
|
1.7
|
6.86
|
120～390
|
| 40
|
100
|
325
|
100
|
12×64
|
64×12
|
1.7
|
7.10
|
100～350
|
| 50
|
100
|
250
|
100
|
12×64
|
64×12
|
1.7
|
8.41
|
90～300
|
| 75
|
100
|
200
|
100
|
12×64
|
64×12
|
1.7
|
8.70
|
80～250
|
| 100
|
100
|
150
|
100
|
12×64
|
64×12
|
1.7
|
9.10
|
70～190
|
| 150
|
50+100+50+30+30+100+50
|
2.0
|
25.00
|
50～150
|
| 200
|
40+80+40+20+40+80+40
|
2.0
|
26.00
|
|
| |
| Note:Plus 12 mesh on basis of 5-layer sintered wire mesh become 6-layer sintered wire mesh ,thickness 3.5 ㎜,and fine resistance to pressure. |
| 
